|
FlexWatch 3440
Network Video Server (NVS)
P/N VS0002
 The
FlexWatch 3440 is a 4 channel stand-alone Network Video Server which
delivers crisp real time live video at a rate up to 90 fps for 4 cameras
over the TCP/IP network. No PC is required to transmit, thus, once IP is
assigned to the server, you can access cameras through a standard Web
browser over the LAN or Internet at any time from anywhere.
The FlexWatch 3440 is designed to meet higher level of TCP/IP based remote
video monitoring and security application with high performance video frame
rate per video channel and versatile and user friendly program interface.
Key features include channel based user authentication for camera control/PTZ/Alarm/Audio,
Built-in motion detection per camera, up to 3200 frame pre/post alarm
buffer, advanced alarm notification interface for e-mail, and FTP and third
party programming.
FW
3440 Specifications Sheet
Features
»
Self contained system.
Built-in Web server, real time operation system, and hardware video
compression
engines included. No PC required to transmit real time video over
the TCP/IP network.
»
High performance video
transmission. 30fps (NTSC), 25FPS (PAL) per channel.
»
Channel based user
authentication. Channel based multi-user level protection for camera
control, PTZ
control, alarm output and audio control.
»
4M Pre/Post video alarm
buffer. 24M memory for pre/post alarm buffer to store event triggered
video in
memory.
»
Built-in Motion detection
and time stamp. Built-in motion detection per each camera with up to
144 blocks
of motion area to filter out unnecessary motion detection area.
Optional time stamp on video.
»
Advanced alarm
notification and service. Powerful FTP, e-mail, and Alarm
notification to CGI path to third
party Web server by various alarm conditions.
Specifications
|
CPU: |
Pentium III 500M or above 32 bit embedded |
|
Memory: |
Flash 6Mbytes /SDRAM: 64Mbytes |
|
Storage: |
Removable IDE HDD,
up to 300mB |
|
Operating
System: |
Linux version
2.4.xx |
|
Playback: |
MS Internet Explorer 5.x or above |
|
Network
Protocols: |
HTTP, TCP/IP,
FTP, Telnet, RARP, PPP, PAP, CHAP, DHCP, SMTP client (e- mail), NTP,
Java |
|
Video: |
»
NTSC:704x480,704x240,352x240,176x112
»
PAL:704x576,704x288,352x288,176x144
»
NTSC/PAL video auto
sensing
»
6 levels image quality |
|
Recording: |
»
2 step frame rate( fast
on event/slow on continuous recording mode)
»
Support both Window
FAT32 or Linux File system |
|
Transmission
and
Recording performance: |
»
Transmission:60FPS(NTSC)/50FPS (PAL)
»
Recording :
30FPS(NTSC)/25FPS (PAL)
»
(Based on Duplex Mode
for 4 channels at 352X240 / 352x288) |
|
Interface: |
»
4 video inputs & 4 loop
through outputs· 1 LAN port (LAN 10/100M BaseT, Auto_Nego)
»
4 Opto-coupled inputs
or 4digital inputs
4 Relay output
»
Two serial ports for
console, modem (PSTN & GSM), serial input/output device
»
PTZ, Voice kit
»
Each port configurable
as RS-232, RS-485 or RS-422 (max 115kbit/s) |
|
Security
features: |
»
Channel based multi
user level protection for camera access, PTZ, Alarm I/O, Voice
»
Image Encryption |
|
Advanced
Service: |
»
Up to 24M memory for
Pre/Post alarm buffer
»
Built-in Motion
detection (Up to 144 sq blocks)
»
e-mail, FTP, alarm
Buffering by event or Schedule
»
IP notification, Alarm
Notification to e-mail, CGI path by event or schedule
»
Video loss detection
»
Dial In/out via PSTN or
GSM modem
»
Time stamp on Video
»
Transmit serial input
data transfer with Video
»
IP notification by
e-mail |
|
PTZ & UART
Control: |
»
Built-in PTZ device
protocol from up to 29 different PTZ protocols from Pelco, Vicon,
Kalatel, Sony, Panasonic, Canon, Honeywell.
»
Bypass command to
control UART device X10 device control to control device over power
line. |
|
Dimensions: |
Width:
12.20” (310mm)
Height:
2.59" (66mm)
Depth:
11.22” (285mm) |
|
Weight: |
9.9lbs (4.5kg) w/o power supply |
|
Power
Supply: |
DC 12 Volt, 4A, SMPS |
|
Operating
temperatures: |
40° ~ 125°F (5° ~ 50°C) |
|
Approvals: |
FCC Class A, CE Class A |
|
