|
FlexWatch 5440
Network Video Recorder (NVR)
P/N VS0003
 The
FlexWatch 5440 is a stand-alone Video Network Recorder (NVR)
with full feature server and DVR (digital video recorder)
capabilities.
The FlexWatch 5440
has 4 channel video inputs and 4 loop-through video outputs with a built-in
hard drive so that it can be connected to your existing analog CCD cameras
to expand your viewing capability to the Internet with complete on-site
digital video recording. Complete Triplex mode
(live video transmission, on-site video recording, remote playback). allows live video and
archived video
playback
through a standard Web browser at any time from any Internet connection.
The FlexWatch 5440 is
designed to meet higher level video applications where remote surveillance and
distributed on-site video recording
is a prerequisite, such as ATM, Branch office, unmanned facility and
franchise stores.
FW
5440 Specifications Sheet
Features
»
Self contained system. Built-in Web server,
real time operation system, hardware video compression
engines with built-in HDD provide complete all-in-one self
contained solution.
»
Powerful and flexible
networking. Supports not only static IP but also dynamic IP from
ADSL,
Cable modem or PSTN based internet connection
»
High performance of video
transmission. 90fps (NTSC)/50FPS(PAL) transmission and 90fps
(NTSC) /25(PAL) at Duplex Mode without frame degradation.
»
Support up to 16 cameras
over the network. Supports up to 12 external network camera or video
servers to
easily expand the number of cameras
»
Two
Step video recording frame rate. Fast video recording on alarm event
while continuously recording at
low frame rates for the efficient use of HDD storage.
»
Developer friendly
interface and functions. Provides full feature of network video
server with powerful and
easy-to-use program interface.
Specifications
|
CPU: |
Pentium III 500M or above 32 bit embedded |
|
Memory: |
Flash 6Mbytes /SDRAM: 64Mbytes |
|
Storage: |
Removable IDE HDD,
up to 300mB |
|
Operating
System: |
Linux version
2.4.xx |
|
Playback: |
MS Internet Explorer 5.x or above |
|
Network
Protocols: |
HTTP, TCP/IP,
FTP, Telnet, RARP, PPP, PAP, CHAP, DHCP, SMTP client (e- mail), NTP,
Java |
|
Video: |
»
NTSC:704x480,704x240,352x240,176x112
»
PAL:704x576,704x288,352x288,176x144
»
NTSC/PAL video auto
sensing
»
6 levels image quality |
|
Recording: |
»
2 step frame rate( fast
on event/slow on continuous recording mode)
»
Support both Window
FAT32 or Linux File system |
|
Transmission
and
Recording performance: |
»
Transmission:90FPS(NTSC)/50FPS (PAL)
»
Recording :
90FPS(NTSC)/25FPS (PAL)
»
(Based on Duplex Mode
for 4 channels at 352X240 / 352x288) |
|
Interface: |
»
4 video inputs & 4 loop
through outputs· 1 LAN port (LAN 10/100M BaseT, Auto_Nego)
»
4 Opto-coupled inputs
or 4digital inputs
4 Relay output
»
Two serial ports for
console, modem (PSTN & GSM), serial input/output device
»
PTZ, Voice kit
»
Each port configurable
as RS-232, RS-485 or RS-422 (max 115kbit/s) |
|
Security
features: |
»
Channel based multi
user level protection for camera access, PTZ, Alarm I/O, Voice
»
Image Encryption |
|
Advanced
Service: |
»
Up to 24M memory for
Pre/Post alarm buffer
»
Built-in Motion
detection (Up to 144 sq blocks)
»
e-mail, FTP, alarm
Buffering by event or Schedule
»
IP notification, Alarm
Notification to e-mail, CGI path by event or schedule
»
Video loss detection
»
Dial In/out via PSTN or
GSM modem
»
Time stamp on Video
»
Transmit serial input
data transfer with Video
»
IP notification by
e-mail |
|
PTZ & UART
Control: |
»
Built-in PTZ device
protocol from up to 29 different PTZ protocols from Pelco, Vicon,
Kalatel, Sony, Panasonic, Canon, Honeywell.
»
Bypass command to
control UART device X10 device control to control device over power
line. |
|
Dimensions: |
Width:
12.20” (310mm)
Height:
2.59" (66mm)
Depth:
11.22” (285mm) |
|
Weight: |
9.9lbs (4.5kg) w/o power supply |
|
Power
Supply: |
DC 12 Volt, 4A, SMPS |
|
Operating
temperatures: |
40° ~ 125°F (5° ~ 50°C) |
|
Approvals: |
FCC Class A, CE Class A |
|
